Asmodus brings to the table an elite double impact combo kit the Pumper 18 Squonker and the C4 RDA !
The Pumper-18 by asMODus is a stabilized wood mod which houses a single 18650 sized battery and utilizes a revolutionary squonking (bottom feeding) system which applies juice via side mounted, spring loaded pump which pushes juice directly into your atomizer.
The Pumper was crafted by combining two of the last stabilized wood squonk mods made by asMODus, the Luna and the Spruzza. The Pumper adopts the direct voltage system of the Luna that provides a protected, mechanical style of vaping which pushes the full voltage of the battery being used up to a maximum of 80.0 watts while providing several protections which are typically only available in variable voltage styled devices such as short circuit, low resistance, low voltage, overheating and over current protections, and an intuitive LED status indicator. The Pumper adopts the pumping system (SSS or smart siphon system) of the Spruzza but has improved upon its design. Rather using a box styled SSS, the SSS of the Pumper presents as a bottle styled version with a convenient top filling system which drastically reduces any chances of leaking. This new bottle still offers a pumping which uses pressure to push juice into your squonk ready atomizer.
The C4 RDA by asMODus is an all new flavor oriented, single coil rebuildable dripping atomizer that utilizes a unique airflow system which consists of fully adjustable, dual 9-point sloped inlets. The idea behind this system is that it causes airflow to evenly enter the RDA at an angle from both sides to create an internal cyclone airflow system. This tornado effect airflow provides ample vapor production and impressive flavor which is directly injected via the angled 9-point inlets.
The C4 RDA build deck is constructed from high quality stainless steel and is 24K gold plated for maximized conductivity. The top cap is constructed from 6063 Aluminium which is hard anodized for a premium finish. The C4 is amazingly low profile for its efficiency and offers a multitude of great features to make this a truly versatile, feature heavy RDA. The top cap locks into place via rivets on the deck to allow for easy airflow adjustments without the risk of removing the cap. The cap still retains the ability to be easily removed from the build deck by simply pulling up on it.
The actual build deck of the C4 was crafted to be an advanced system with an easy to build deck. The deck accommodates single coil builds and offers beveled edges going through the middle of the RDA to allow a screwdriver / building tool to be set in place and drastically aid the building process. By using a tool and letting it lay down on these bevels allows for perfect coil placement. Coils are secured in place via vertically set hex screws which tightens wires down into place. The deck even offers a cut off section of the deck walls which allows to easy snipping of wires. The juice well presents itself in a slightly outwards-sloped shape which was implemented to provide even juice distribution. The C4 has the ability to easily change between squonk (bottom feeding) and standard usage and utilizes a split 510 pin which symmetrically dispenses juice into your wick and not upwards toward the user.
Product Specifications (Pumper 18):
Product Specifications (C4):
- Requires a single 18650 sized battery (not included)
- Direct voltage with a maximum of 80.0 watts
- Chip offers a wide range of protections: reverse polarity, short circuit, low resistance, low voltage, and over current
- 10 second firing cut off timer
- Chassis is constructed from stabilized wood
- Juice bottle holds approximately 8.0mL of juice
- Diameter: 24mm
- Constructed from premium stainless steel and 6063 hard anodized aluminium
- Ultra low profile
- 24K Gold plated build deck which offers maximized conductivity and an increased lifespan
- Single coil deck which uses a never before seen, angled 9-point inlets on both sides of the RDA to create an internal tornado / cyclone effect during intake
- Hard anodized aluminium cap locks into place which provides for easy airflow adjustments
- Build deck has cut offs at the end of each wire port for easy access snipping of wires
- Juice well is angled outwards which uses gravity to push juice into the most efficient location
- Split internal 510 pin which evenly distributes any squonked (bottom fed) juice into the deck into your wick and not upwards towards the user
- Wires are secured into place via top side hex screws
- Topped with a Honeycomb acrylic drip tip and includes a snub nosed black Delrin drip tip
- 1x C4 LP BF RDA by asMODus
- 2x Pre-wrapped fused Clapton coils measuring in at approximately 0.2 ohm each
- 1x Allen key for securing wires
- 1x Enlarged Allen key for switching / adjusting the bottom 510 pin
- 1x Standard 510 pin
- 1x Bottom feeding 510 pin
- 1x Spare part pack
- 1x Honeycomb acrylic drip tip (colors are randomized)
- 1x Black Delrin snub nose flavor chaser drip tip
- 1x User manual
- 1x Pumper 18 Bottom Feeding Mod by asMODus
- 1x User manual
- 1x Warranty card