The C4 RDA by asMODus is an all new flavor oriented, single coil rebuildable dripping atomizer that utilizes a unique airflow system which consists of fully adjustable, dual 9-point sloped inlets. The idea behind this system is that it causes airflow to evenly enter the RDA at an angle from both sides to create an internal cyclone airflow system. This tornado effect airflow provides ample vapor production and impressive flavor which is directly injected via the angled 9-point inlets.
The C4 RDA build deck is constructed from high quality stainless steel and is 24K gold plated for maximized conductivity. The top cap is constructed from 6063 Aluminium which is hard anodized for a premium finish. The C4 is amazingly low profile for its efficiency and offers a multitude of great features to make this a truly versatile, feature heavy RDA. The top cap locks into place via rivets on the deck to allow for easy airflow adjustments without the risk of removing the cap. The cap still retains the ability to be easily removed from the build deck by simply pulling up on it.
The actual build deck of the C4 was crafted to be an advanced system with an easy to build deck. The deck accommodates single coil builds and offers beveled edges going through the middle of the RDA to allow a screwdriver / building tool to be set in place and drastically aid the building process. By using a tool and letting it lay down on these bevels allows for perfect coil placement. Coils are secured in place via vertically set hex screws which tightens wires down into place. The deck even offers a cut off section of the deck walls which allows to easy snipping of wires. The juice well presents itself in a slightly outwards-sloped shape which was implemented to provide even juice distribution. The C4 has the ability to easily change between squonk (bottom feeding) and standard usage and utilizes a split 510 pin which symmetrically dispenses juice into your wick and not upwards toward the user.
- Diameter: 24mm
- Constructed from premium stainless steel and 6063 hard anodized aluminium
- Ultra low profile
- 24K Gold plated build deck which offers maximized conductivity and an increased lifespan
- Single coil deck which uses a never before seen, angled 9-point inlets on both sides of the RDA to create an internal tornado / cyclone effect during intake
- Hard anodized aluminium cap locks into place which provides for easy airflow adjustments
- Build deck has cut offs at the end of each wire port for easy access snipping of wires
- Juice well is angled outwards which uses gravity to push juice into the most efficient location
- Split internal 510 pin which evenly distributes any squonked (bottom fed) juice into the deck into your wick and not upwards towards the user
- Wires are secured into place via top side hex screws
- Topped with a Honeycomb acrylic drip tip and includes a snub nosed black Delrin drip tip
- 1x C4 LP BF RDA by asMODus
- 2x Pre-wrapped fused Clapton coils measuring in at approximately 0.2 ohm each
- 1x Allen key for securing wires
- 1x Enlarged Allen key for switching / adjusting the bottom 510 pin
- 1x Standard 510 pin
- 1x Bottom feeding 510 pin
- 1x Spare part pack
- 1x Honeycomb acrylic drip tip (colors are randomized)
- 1x Black Delrin snub nose flavor chaser drip tip
- 1x User manual